MSDS
Material Safety Data Sheet
STP® Heavy Duty Brake Fluid, DOT 3
Document: MSDS0093, October 20, 1999 Page 1 of 7
1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
STP® Heavy Duty Brake Fluid, DOT 3
Manufactured for:
The Armor All / STP Products Company
1221 Broadway
Oakland, CA 94612
Telephone: (510)271-7000
Product Type
Auto Brake Fluid
Stock
ST0925, ST0925CAN, ST0925SP, ST0925PR, ST0926, ST0926CAN,
Z-302
Formula
RM3715, RM3725, RM3837, RM3941, RM3950
Emergency Phone
Numbers
For Medical Emergencies Call:
1-800-446-1014
For Transportation Emergencies
Call: 1-800-424-9300 (Chemtrec)
2 COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Materials Material % CAS # Exposure
Limit
Source
Triethylene Glycol
Monobutyl Ether
0-70 143-22-6 None Established (3)
Triethylene Glycol
Monoethyl Ether
0-45 112-50-5 None Established (3)
Triethylene Glycol
Monomethyl Ether
0-35 112-35-6 None Established (3)
Glycol Heavies 0-35 25322-68-3 None Established (3)
Polyalkylene Glycol 0-10 9038-95-3 None Established (3)
Diethylene Glycol
Monobutyl Ether
0-10 112-34-5 None Established (3)
Diethylene Glycol
Monomethyl Ether
0-5 111-77-3 None Established (3)
Diethylene Glycol
Monoethyl Ether
0-2 111-90-0 None Established (3)
None of the ingredients is listed as a carcinogen or potential carcinogen
by IARC, NTP or OSHA.
The Permissible Exposure Limits (PEL) reported above are the pre-1989 limits
that were reinstated by OSHA following a decision by the 11
th
Circuit Court of
Appeals. These PELs are being enforced by Federal OSHA. Be aware that
more restrictive limits may be enforced by some states. The Armor All / STP
Products Company recommends that the lower exposure limits be observed
as reasonable worker protection.