Technical Specifications

Perma-Patch

Product Description

n Makes receptacle, ceiling and can light

relocation easy.

n Imprinted with standard design

patterns for easy use.

n Easily installs using standard

compounds. No special tools or

fasteners needed.

n Second coat of compound can be

applied immediately – very light

skim-coat to ﬁnish.

Applications

n Door knob damage

n Electrical receptacle

n Ceiling and can lights

n Drywall mis-cuts

Outlet-Patch

Product Description

n Pre-cut to ﬁt standard receptacle boxes.

n Easily installs using standard

compounds. No special tools or

fasteners needed.

n Second coat of compound can be

applied immediately – very light

skim-coat to ﬁnish.

Applications

n Mis-cut or damaged areas around

receptacle boxes.

Outperforms

metal patches.

Strait-Flex patches

quickly repair

damaged drywall

areas and mis-cuts.

A C C E L E R A T E P E R F E C T I O N

perma

patch

outlet

patch

L A R G E D R Y W A L L P A T C H

E L E C T R I C A L O U T L E T P A T C H

PAGE 1
perma-patch L A R G E D RY WA L L PAT C H Outperforms metal patches. Strait-Flex patches quickly repair damaged drywall areas and mis-cuts. outlet-patch E L E C T R I C A L O U T L E T PAT C H Perma-Patch Outlet-Patch Product Description Product Description n Makes receptacle, ceiling and can light n Pre-cut to fit standard receptacle boxes. relocation easy. n Imprinted with standard design patterns for easy use. n Easily installs using standard n Easily installs using standard compounds.
PAGE 2
perma-patch Directions for Use 1 Lightly sand area to be repaired. 2 Apply drywall compound 1/4” thick directly to back of patch. Place patch over center of repair and wipe down flat to wall with a taping knife. Immediately skim-coat patch and let dry. Compound that remains on back side of STRAIT-FLEX PATCHES makes patches very rigid. 3 Apply second coat, let dry and sand. STRAIT-FLEX PATCHES will not fuzz up during sanding. Perma-Patch Specifications n n n n 8” x 8” size.