Instructions / Assembly

I:\Marketing and Promotion\Product Information\Submittle Info Sheets\Flex-90 instruction-
Assembly.doc
New Concept Drywall Products
FLEX-90 º
DESCRIPTION
(Speed,
Perfection and
Longevity)
Patented PVC tight fibered cotton composite corner tape with diamond-punched paper
edging that is 2 ” wide, .014 thick and comes in 100’ rolls.
Strait-Flex Flex-90º has PUR-laminated nose to protect against paper fuzz-ups during
finishing and sanding.
ADVANTAGES
Straightens small framing irregularities.
Memory-free hinge design allows for ease of installation and straighter corners.
Installs fast using standard compounds. No special tools or fasteners needed. No
nail pops.
Inside 90 º corners where a large fill or straightening is required, or where strength
and speed of finish are required.
Diamond-punched paper ensures ultimate bonding and faster drying.
Second coat of compound can be applied immediately-very light skim coat to finish.
Use in place of metal cornerbead.
Rustproof.
No. Cracks. No Callbacks.
WARRANTY
Strait-Flex products are backed by a lifetime warranty. When applied to a sound structure,
built on a permanent foundation using recommended application techniques, we warrant that
these products will not edge-crack for the lifetime of the structure. Contact Strait-Flex
International Inc for complete details.
DIRECTIONS
Cut Strait-Flex to desired length. Adjust to desired angle.
Apply using a liberal coat of all-purpose compound with joint knife. Use tile
setting compounds in wet areas.
Press Strait-Flex into wet compound. Adjust if necessary to create straight line
and wipe down with joint knife. Immediately apply light skim coat and let dry.
Apply final coat, let dry and sand.
STORAGE
Store in dry place protected from moisture.
Submittal Approvals:
Job Name:
Contractor:
Date:

Summary of content (1 pages)