Instructions / Assembly
I:\Marketing and Promotion\Product Information\Submittle Info Sheets\Roll Patch instruction_assembly.doc
New Concept Drywall Products
ROLL PATCH
DESCRIPTION
(Speed,
Perfection and
Longevity)
Patented PVC fiber composite material patch that comes in 5 1/2”, .013” thick and
11” x .016” thick both on a roll which weights 8.6. Roll-Patch is also packaged in 4
rolls per case on the 5 ½” and 1 roll per case on the 11”and weigh 20 pounds and
12.0 lbs respectfully. Roll-Patch is a drywall patch used for custom applications.
Standard design patterns are imprinted on Roll-Patch for easy use.
Roll-Patch makes repairs strong, fast and easy. Same high-tech composite material
as Strait-Flex.
.
ADVANTAGES
Quickly repairs multiple damaged area to drywall
PVC fiber composite material is strong and will not soften or sag
Material is imprinted with designs of receptacle/ceiling/can light for easy
adjustments
Makes receptacle, ceiling and can light relocation easy.
Material is not affected by water and damp conditions
Roll-Patch will not fuzz-up during sanding like competitive fiber glass-metal
patches
Waterproof, rustproof
WARRANTY
Strait-Flex products are backed by a lifetime warranty. When applied to a sound structure,
built on a permanent foundation using recommended application techniques, we warrant that
these products will not edge-crack for the lifetime of the structure. Contact Strait-Flex
International Inc for complete details.
DIRECTIONS
Cut patch to desired dimensions.
Prepare surface by cleaning and lightly sanding area around receptacle.
Apply ¼” of quick set or drywall compound directly to back of Roll Patch.
Flip over patch and position Roll Patch over center of repair and wipe down
flat to wall using joint knife.
Immediately skim coat edges of patch and let dry. Compound that remains
on back side of Roll Patch in damaged or mis-cut areas makes Roll Patch
very rigid.
Apply second coat. Let dry and sand. Roll Patch will not fuzz up during
sanding. One Roll Patch repairs holes up to six inches in diameter.
STORAGE
Store in dry place protected from moisture
Submittal Approvals:
Job Name:
Contractor:
Date: