User's Manual
Table Of Contents
- About This Guide
- Safety
- Introducing the Alaris 3-D Printing System
- Installing Objet Software
- Using Objet Studio
- Using Job Manager
- Operating & Maintaining the Alaris30 3-D Printer
- Starting the Alaris30 Printer
- Loading Model and Support Cartridges
- Producing Models
- Resuming Production After Printing has Stopped
- Changing the Model Material
- Keeping the Alaris Printer in Idle Mode
- Shutting Down the Alaris Printer
- Maintaining the Alaris Printer
- Routine Maintenance Schedule
- Cleaning the Print Heads
- Pattern Test
- Improving Print Quality
- Cleaning and Replacing the Wiper
- Cleaning and Replacing the Roller Waste Collector
- Aligning the Print Heads
- Replacing Print Heads
- Calibrating the Load Cells
- Replacing the Odor Filter
- Replacing the UV Lamp
- Replacing the Waste Container
- Cleaning the Exterior Panels
- Backing-Up and Restoring Printer Settings
- ReInitiate Wizard
- Handling Printed Models
Using Objet Studio
5–22
DOC-24000 Rev. A
PanLeft Eachmouseclickmovesthebuildtraytothe
leftintheviewingpanebyonestep.
PanRight Eachmouseclickmovesthebuildtraytothe
rightintheactiveviewingpanebyonestep.
PanUp Eachmouseclickmovesthebuildtrayupin
theactiveviewingpanebyonestep.
Pa
nDown Eachmouseclickmovesthebuildtraydownin
theactiveviewingpanebyonestep.
AdvanceForward Thesameas .Eachmouseclickzoomsinto
thetraydisplayedintheactiveviewingpane.
AdvanceBackward Thesameas .Eachmouseclickzoomsout
ofthetraydisplayedinthe act
iveviewing
pane.
RotateLeft Eachmouseclickrotatesthebuildtraytothe
leftintheactiveviewingpanebyonestep.
RotateRight Eachmouseclickrotatesthebuildtraytothe
rightintheactiveviewingpanebyonestep.
RotateUp Eachmouseclickrotatesthebuildtrayupin
theac
tiveviewingpanebyonestep.
RotateDown Eachmouseclickrotatesthebuildtraydownin
theactiveviewingpanebyonestep.
Camera Displaysavirtualcameraanditsviewingangle
ofthetray.
Icon Tool Tip Name Purpose
DRAFT 4 - July 11, 2010