User's Manual
Table Of Contents
- About This Guide
- Safety
- Introducing the Alaris 3-D Printing System
- Installing Objet Software
- Using Objet Studio
- Using Job Manager
- Operating & Maintaining the Alaris30 3-D Printer
- Starting the Alaris30 Printer
- Loading Model and Support Cartridges
- Producing Models
- Resuming Production After Printing has Stopped
- Changing the Model Material
- Keeping the Alaris Printer in Idle Mode
- Shutting Down the Alaris Printer
- Maintaining the Alaris Printer
- Routine Maintenance Schedule
- Cleaning the Print Heads
- Pattern Test
- Improving Print Quality
- Cleaning and Replacing the Wiper
- Cleaning and Replacing the Roller Waste Collector
- Aligning the Print Heads
- Replacing Print Heads
- Calibrating the Load Cells
- Replacing the Odor Filter
- Replacing the UV Lamp
- Replacing the Waste Container
- Cleaning the Exterior Panels
- Backing-Up and Restoring Printer Settings
- ReInitiate Wizard
- Handling Printed Models
Using Job Manager
6–2
DOC-24000 Rev. A
TheJobManagerapplicationisdifferentforclientworkstationsandforthe
computerconnecteddirectlytothe3‐Dprinter.
• JobManagerinstalledonclientcomputersdisplaysthequeueand
statusonlyforjobssenttothe3‐Dprinterserverfromthatcomputer,
andallowstheusertoeditonlythesejobs.
• JobManagerinstalledonthecomputerdirectlyconnectedtoaspecific
3‐Dprinterdisplaysthequeueandstatusforalljobssenttothat3‐D
printerbyclientcomputersonthenetwork.Italsoallowseditingand
manipulationofalljobs,andenablesre‐sendingpreviously‐printed
jobstotheprinter
.
Client Job Manager
WhenyouopentheclientObjetStudio/JobManagersoftwareforthefirst
time,adialogboxopenspromptingyoutoconnecttoanObjetserver
computer.Todothis,theservercomputermustbeoperatingandconnected
tothelocalnetwork.
¾ ClickBrowsetofindandselectthenameoftherequiredserver
computerandthenclick
OKtoclosethedialogbox.
Figure 6-1: Server connection dialog box
To change the server-computer connection (to connect to another
printer):
¾
FromtheJobManagerscreen,clicktheConnecticononthetoolbar,
oropenthe3‐DPrintermenuandselect
Set Printer.
If there are several Alaris printers on the local network, client computers can
connect to any of them, but only one at a time.
DRAFT 4 - July 11, 2010