User's Manual
Table Of Contents
- About This Guide
- Safety
- Introducing the Alaris 3-D Printing System
- Installing Objet Software
- Using Objet Studio
- Using Job Manager
- Operating & Maintaining the Alaris30 3-D Printer
- Starting the Alaris30 Printer
- Loading Model and Support Cartridges
- Producing Models
- Resuming Production After Printing has Stopped
- Changing the Model Material
- Keeping the Alaris Printer in Idle Mode
- Shutting Down the Alaris Printer
- Maintaining the Alaris Printer
- Routine Maintenance Schedule
- Cleaning the Print Heads
- Pattern Test
- Improving Print Quality
- Cleaning and Replacing the Wiper
- Cleaning and Replacing the Roller Waste Collector
- Aligning the Print Heads
- Replacing Print Heads
- Calibrating the Load Cells
- Replacing the Odor Filter
- Replacing the UV Lamp
- Replacing the Waste Container
- Cleaning the Exterior Panels
- Backing-Up and Restoring Printer Settings
- ReInitiate Wizard
- Handling Printed Models
Using Job Manager
6–4
DOC-24000 Rev. A
Job Manager
Operations
Evenaftersendingabuildtraytothe3‐Dprinter,youcaninspectthetray—
andmakechangestoit,ifnecessary—aslongasitisstillintheprintqueue.
To inspect the build tray:
1. Selectthejob.
2. ClicktheEditJobiconoropentheJobmenuandselect
Edit.
ObjetStudioopens,displayingthebuildtray.Tomakechangestoit,see
“MakingchangestoaJob”onpage 6‐10.
ThefollowingoperationsareavailablefromtheclientJobManager
interface:
The3‐DprinterStatusscreenenablesclientstomonitortheprogressof
printingjobs.Todisplaythescreen,clicktheMa
chineStatusicon .
Icon Menu Option Purpose
3‐DPrinter>
NewJob
LaunchesObjetStudio;topreparenewtrays.
3‐DPrinter>
SetPrinter
Displaysanetwork‐browsingdialogbox,to
connecttoanObjetservercomputer.Tospecify
acomputer,itmustbeoperatingand
connectedtothelocalnetwork.
—— Displaysthestatus ofthe3‐Dpr
inter(see
figure 6‐3).
3‐DPrinter>Report Displaysoptionsforusermessagesand alerts
(paperprinter,e‐mail,SMS—see“Configuring
UserAlerts”onpage 6‐5).
Job>Delete... Removestheselectedjobfromthe queue.
Job>View… Opensawindowdisplayingtheselectedtray.
Inthiswindow,youcanviewthetrayfrom
d
ifferentangles.
Job>Properties Op ensawindowdisplayingthepropertiesof
theselectedmodel.
Job>Edit LaunchesObjetStudioandloadsthecurrent
tray,toenablemakingchangestothetrayafter
itissenttotheserverbutbeforeitisprinted.
Help>About... DisplaystheJobManagerversion.
DRAFT 4 - July 11, 2010