User's Manual
Table Of Contents
- About This Guide
- Safety
- Introducing the Alaris 3-D Printing System
- Installing Objet Software
- Using Objet Studio
- Using Job Manager
- Operating & Maintaining the Alaris30 3-D Printer
- Starting the Alaris30 Printer
- Loading Model and Support Cartridges
- Producing Models
- Resuming Production After Printing has Stopped
- Changing the Model Material
- Keeping the Alaris Printer in Idle Mode
- Shutting Down the Alaris Printer
- Maintaining the Alaris Printer
- Routine Maintenance Schedule
- Cleaning the Print Heads
- Pattern Test
- Improving Print Quality
- Cleaning and Replacing the Wiper
- Cleaning and Replacing the Roller Waste Collector
- Aligning the Print Heads
- Replacing Print Heads
- Calibrating the Load Cells
- Replacing the Odor Filter
- Replacing the UV Lamp
- Replacing the Waste Container
- Cleaning the Exterior Panels
- Backing-Up and Restoring Printer Settings
- ReInitiate Wizard
- Handling Printed Models
Using Job Manager
6–10
DOC-24000 Rev. A
Making
changes to a
Job
Fromthejob(“print”)queueofJobManager,youcanopenjobstomake
changestothembeforeprinting.
To make changes to a job:
1. Selectthejobintheprintqueue.
2. ClicktheEditJobiconoropentheJobmenuandselect
Edit.
ObjetStudioopens,displayingthebuildtray.(Thestatusofthejobin
JobManagerchangesfrom“Waiting”to“Editing.”)
3. MakechangestothebuildtrayinObjetStudio(seechapter 5,“Using
ObjetStudio”).
4. InObjetStudio,savethechangesbyselecting
File > Save Tray(orby
pressing
Ctrl+S).
5. CloseObjetStudio.
ThestatusofthejobinJobManagerchangesbackto“Waiting.”
Job>RestartJob Forastoppedjobintheprintqueue:Starts
printingtheselectedjobfromthebeginning.
ForaselectedjobintheHistorysection:Moves
thejobtotheprintqueueandchangesitsstatus
toWaiting.
Job>Stop... Instructsthe3‐D printertostopprintingafter
cu
ringthecurrentlyprintedslice.(Youcan
continueprintingwiththeResumeiconor
menuoption,butforshortinterruptions,use
thePauseiconormenuoption.)
Job>Pause... Instructsthe3‐Dprintertostopprintingafter
curingthecurrentlyprintedslice.(This
commanddoesnotflushtheprintingbuffer.
The
refore,useitinsteadofStopwhenyou
intendtocontinueprintingthejobshortly.)
Job>Resume Continuesprintingthecurrentjobafter
printingwasstoppedwiththeStoporPause
iconormenuoption.
Job>DeleteJob... Removestheselectedjobfromthequeue.
Job>ReviewJob… Opensawindowdi
splayingtheselectedtray.
Inthiswindow,youcanviewthetrayfrom
differentangles.
Job>JobInfo… Opensawindowdisplayingthepropertiesof
theselectedmodel.
Job>EditJob… LaunchesObjetStudioandloadstheselected
tray,toenablemakingchangestoitbefore
beingprinted.(See“MakingchangestoaJob
,”
below.)
Help>About... DisplaystheJobManagerversion.
Icon Menu Option Purpose
DRAFT 4 - July 11, 2010