User's Manual

DOC08010 Rev. A (DRAFT 1) 5–69
Stratasys P750K User Guide
Jobs Queue Onȱtheȱserver,ȱtheȱ JobsȱQueue ȱlistsȱtheȱlastȱ15ȱjobsȱsentȱfromȱclientȱcomputers.ȱ
Onȱclientȱw orkstations,ȱtheȱ
JobsȱQueue ȱlistsȱjobsȱsentȱfromȱthatȱcomputerȱtoȱ
theȱprinterȱserver.ȱ
Informationȱforȱeachȱofȱtheȱqueuedȱjobsȱisȱdisplayed,ȱincluding ȱtheȱjobȱstatus.
Inȱaddition,ȱtheȱfollowingȱinformationȱisȱdisplayed:
• Owner—theȱcomputerȱthatȱsentȱtheȱjob
• BuildȱTime—theȱestimatedȱbuildingȱtimeȱforȱtheȱjob
• ModelȱConsumption—theȱamountȱofȱmodelȱmaterialȱrequiredȱtoȱ
completeȱtheȱjob,ȱandȱtheȱamountȱactuallyȱusedȱtillȱnow
• SupportȱConsumption—theȱamountȱofȱsupportȱmaterialȱrequiredȱtoȱ
completeȱtheȱjob,ȱandȱtheȱamountȱactuallyȱusedȱtillȱnow
• PrintingȱMode—HS=HighȱSpeed,ȱHQ=HighȱQuality,ȱDM=Digitalȱ
Material
Printing Progress
Theȱ Time ȱpanelȱshowsȱprintingȱtimesȱandȱtheȱnumberȱofȱslicesȱsentȱtoȱtheȱprinter.
History TheȱHistoryȱpanelȱshowsȱinformationȱforȱtheȱlastȱ50ȱjobsȱandȱtheirȱfinalȱ
status.ȱYouȱcanȱdragȱaȱjobȱfromȱHistoryȱtoȱJobsȱQueueȱtoȱprintȱtheȱtrayȱagain.
Available
Resources
TheȱAvailableȱResourcesȱpanelȱcontainsȱgraphicȱindicatorsȱthatȱshowȱtheȱ
amountȱofȱavailableȱprintingȱmaterialsȱremainingȱinȱtheȱprinter.
*
ȱ
Material
Consumption
• Actual—theȱamountȱofȱmaterialȱusedȱtillȱnow
• Required—theȱamountȱofȱmaterialȱstillȱneededȱtoȱfinishȱtheȱjob
Tray Preview TheȱTrayȱPreviewȱpanelȱdisplaysȱtheȱbuildȱtrayȱviewȱofȱtheȱjobȱselectedȱinȱtheȱ
JobȱQueueȱorȱtheȱHistoryȱlist.ȱ
Onȱaȱserver,ȱyouȱcanȱopenȱanȱenlargedȱpreviewȱwindowȱbyȱclickingȱonȱtheȱ
TrayȱPreviewȱdisplayȱ(seeȱ“Extendedȱ
TrayȱPreview”ȱonȱpage 78).
Waste IfȱyouȱmoveȱtheȱmouseȱoverȱtheȱWasteȱdisplay, ȱtheȱamountȱofȱwasteȱinȱtheȱ
containerȱisȱdisplayed.
Status Meaning
Waiting Printingȱofȱthisȱjobȱhasȱnotȱstarted.
Building Printingȱofȱthisȱjobȱisȱinȱprogress.
Stopped Printingȱofȱthisȱjobȱwasȱinterrupted.ȱPrintingȱcanȱlaterȱbeȱ
continuedȱ(Resume)ȱorȱbegunȱagainȱ(Restart).
Error Errorsȱoccurredȱduringȱtheȱprintingȱofȱthisȱjob,ȱandȱitȱwasȱ
placedȱinȱtheȱJobsȱQueueȱagain.
Editing Thisȱjobȱisȱnow
ȱbeingȱeditedȱinȱObjetȱStudio.
Spooling Theȱjobȱfileȱisȱbeingȱspooledȱinȱtheȱprinter.
Preprocessing
Theȱ3Dȱprinterȱisȱreadyingȱitselfȱforȱprinting:ȱtheȱcoverȱ
locks,ȱprintȱheadsȱwarmȱupȱandȱareȱputȱinȱstartingȱposition,ȱ
UVȱlamp
s ȱ areȱ turnedȱon,ȱandȱtheȱbuildȱtrayȱlevelȱisȱ
adjusted.
OnȱSchedule Theȱjobȱisȱscheduledȱtoȱbeȱprintedȱatȱaȱspecifiedȱtime.
*ObjetȱStudioȱdisplaysȱtheȱweightȱofȱtheȱprintingȱmaterialsȱinȱboth ȱcartridgesȱ
asȱlongȱasȱeachȱcartridgeȱcontainsȱmoreȱthanȱ100ȱgramsȱofȱmaterial.ȱTheȱ
weightȱunderȱ100ȱgramsȱisȱnotȱcalculatedȱandȱdisplayed.ȱHowever,ȱifȱaȱ
cartridgeȱcontainsȱlessȱthanȱ100ȱgramsȱofȱmaterial,ȱtheȱprinterȱusesȱit—asȱ
longȱas
ȱtheȱmaterialȱinȱtheȱotherȱcartridgeȱweighsȱmoreȱtha n ȱ100ȱgrams.ȱInȱ
anyȱcase,ȱtheȱweightȱofȱeachȱcartridgeȱisȱdisplayedȱinȱtheȱprinterȱapplication.