User's Manual

Operating & Maintaining the Stratasys P750K 3D Printer
6–10 DOC08010 Rev. A (DRAFT 1)
Youȱcannotȱcontinueȱprintingȱtheȱmodelȱif:
• Theȱnumberȱofȱtheȱlastȱsliceȱprintedȱdoesȱnotȱappearȱinȱtheȱprinterȱ
interface,ȱevenȱifȱtheȱserverȱcomputerȱdisplaysȱtheȱContinueȱfromȱSliceȱ
confirmationȱdialogȱbox.
• Thereȱwasȱaȱrelativelyȱlongȱinterruptionȱinȱprinting,ȱevenȱifȱtheȱ“lastȱ
slice”ȱandȱ“continueȱfromȱslice”ȱindicatorsȱareȱcorrect.ȱTheȱpartȱofȱtheȱ
modelȱalreadyȱprintedȱmayȱdeformȱorȱshrink,ȱandȱthereȱmightȱbeȱaȱ
visibleȱdifferenceȱbetweenȱitȱandȱtheȱnewlyȱprintedȱpart.ȱTheȱeffectsȱofȱaȱ
printingȱstoppage
ȱonȱaȱmodelȱdependȱonȱtheȱmodelȱsizeȱandȱstructure,ȱ
Modelȱmaterialȱused,ȱambientȱtemperatureȱandȱtheȱlengthȱofȱtheȱ
stoppage.
If you cannot continue printing:
1. CancelȱtheȱprintȱjobȱinȱtheȱJobȱManagerȱscreen.
2. Removeȱtheȱpartiallyȱprintedȱmodelȱfromȱtheȱbuildȱtray.ȱ
3. RestartȱtheȱjobȱfromȱtheȱJobȱManagerȱscreenȱ(inȱObjetȱStudio).
You can stop and later resume printing from either the printer interface or
from the Job Manager screen of Objet Studio. After clicking the Stop button
on the printer interface, you can resume printing only from the Job Manager
screen. However, after clicking the Pause button in the printer interface, you
can only resume printing from the printer interface.