User's Manual

DOC08010 Rev. A (DRAFT 1) 6–15
Stratasys P750K User Guide
Positioning Byȱdefault,ȱAutomaticȱslotȱselectionȱdeterminesȱtheȱbestȱslotȱlocationsȱforȱtheȱ
cartridgesȱinȱtheȱmaterialsȱcabinet,ȱbasedȱonȱmaterialsȱcurrentlyȱinȱtheȱ
system.ȱThisȱensuresȱminimumȱflushingȱofȱmaterialsȱcurrentlyȱloaded.ȱIfȱ
thereȱisȱaȱspecialȱneedȱtoȱloadȱcartridgesȱinȱcertainȱslotȱlocations,ȱselectȱ
Manual slot selection.
Afterȱclickingȱ
Apply,ȱtheȱMaterialȱReplacementȱOptionsȱscreenȱappears,ȱbutȱ
now,ȱeachȱmaterialȱselectionȱboxȱcorrespondsȱtoȱoneȱofȱtheȱcartridgeȱlevelsȱ
inȱtheȱmaterialsȱcabinet.
Figure 6-12: Manual cartridge placement
Flush Again TheȱflushingȱcycleȱyouȱselectȱinȱtheȱMaterialȱReplacementȱOptionsȱscreenȱ
determinesȱhowȱthoroughlyȱtoȱflushȱoutȱmaterialȱcurrentlyȱinȱtheȱsystem.ȱ
AfterȱselectingȱtheȱEconomyȱcycleȱandȱcompletingȱtheȱwizard,ȱyouȱmightȱ
decideȱthatȱyouȱrequireȱaȱmoreȱthoroughȱflushing,ȱtoȱensureȱaccurateȱ
modelȱcolor.ȱOr,ȱyouȱmayȱnoticeȱ
thatȱprintedȱmodelsȱareȱnotȱsatisfactoryȱ
becauseȱtheyȱcontainȱtracesȱofȱtheȱpreviousȱmaterial.ȱIfȱso,ȱyouȱcanȱflushȱoutȱ
moreȱmaterial,ȱsoȱthatȱtheȱnextȱmodelsȱwillȱbeȱprintedȱwithȱpureȱmaterial.
Afterȱselectingȱtheȱ“flushȱagain”ȱoptionȱandȱclickingȱ
Apply,ȱtheȱMaterialȱ
ReplacementȱOptionsȱscreenȱappears,ȱwhereȱyouȱselectȱtheȱaffectedȱ
material(s)ȱtoȱbeȱflushed.
Note: Select only the materials you need to flush.