User's Manual

DOC08010 Rev. A (DRAFT 1) 6–33
Stratasys P750K User Guide
8. Whenȱtheȱfollowingȱscreenȱappears,ȱremoveȱtheȱtransparency.
Figure 6-42: Head Alignment wizard—steps 8–10
Theȱtransparencyȱsheetȱisȱprintedȱwithȱsetsȱofȱverticalȱlinesȱinȱsevenȱ
columns,ȱeachȱshowingȱtheȱresultsȱfromȱaȱdifferentȱprintȱhead.
Figure 6-43: Sample head-alignment test
Note: There is no column for head H7 because its alignment is used as a
reference for aligning all other heads.
9. Forȱeachȱcolumnȱofȱlines,ȱuseȱaȱmagnifyingȱglassȱorȱloupeȱtoȱinspectȱ
pairsȱofȱconsecutiveȱrowsȱprintedȱonȱtheȱtransparencyȱtoȱseeȱwhereȱtheȱ
verticalȱlinesȱalign.
Figure 6-44: Comparing rows of alignment lines
Note: It does not matter which pair of lines you inspect, since they were all
printed by the same head. Choose a pair of clearly printed lines for the
inspection. (Since some nozzles may not print clearly, you may have to
inspect several pairs of lines to properly view the alignment.)