User's Manual

Operating & Maintaining the Stratasys P750K 3D Printer
6–40 DOC08010 Rev. A (DRAFT 1)
13. Afterȱconfirmingȱallȱofȱtheȱitemsȱlistedȱinȱtheȱwizardȱscreen,ȱclickȱNext.
Printingȱmaterialȱ(resin)ȱisȱjettedȱfromȱeachȱheadȱandȱitsȱweightȱisȱ
automaticallyȱrecorded.ȱThisȱprocessȱisȱrepeatedȱforȱeachȱprintingȱ
mode,ȱafterȱwhichȱtheȱfollowingȱscreenȱappears.
Figure 6-57: Emptying the Resin Container
14. Carefullyȱremoveȱtheȱresinȱcontainerȱfromȱtheȱscaleȱandȱemptyȱitȱintoȱ
theȱpurgeȱunitȱinȱtheȱprinter.ȱThenȱreturnȱtheȱcontainerȱtoȱtheȱscale.
15. Closeȱtheȱprinterȱandȱclickȱ
Next.
Theȱprinterȱcuresȱtheȱremainingȱresinȱinȱtheȱcontainer.
16. Whenȱtheȱfollowingȱscreenȱappears,ȱremoveȱtheȱscaleȱandȱcleanȱtheȱ
buildȱtray.ȱ
Figure 6-58: Removing the Scale confirmation screen
Theȱwizardȱusesȱtheȱdataȱcollectedȱtoȱanalyzeȱtheȱconditionȱofȱtheȱprintȱ
headsȱandȱoptimizeȱthemȱsoȱtheyȱprintȱmodelsȱwithȱaȱuniformȱlayerȱofȱ
material.ȱ
• Ifȱtheȱheadsȱareȱinȱsatisfactoryȱcondition,ȱtheȱfollowingȱwizardȱscreenȱ
appears.
CAUTION: The resin in the container is uncured.
¾
To prevent contact with skin, wear neoprene or nitrile gloves.
¾ Dispose of uncured resin in accordance with applicable regulations. By
emptying the container into the purge unit, the resin is stored in the
printer’s sealed waste container.