User's Manual

DOC08010 Rev. A (DRAFT 1) 6–55
Stratasys P750K User Guide
The following steps apply when using the Stratasys UV sensor that you
connect to the printer (TOL-03005-S). They do not apply when using a
stand-alone UV radiation measuring device.
UV sensor
connected to printer
1. AdjustȱtheȱwizardȱforȱtheȱsensitivityȱofȱtheȱUVȱsensorȱbyȱenteringȱtheȱ
CFȱnumberȱthatȱappearsȱonȱtheȱsensor’sȱlabel.
Figure 6-85: UV sensor synchronization
Figure 6-86: Label on the bottom of the UV sensor
TheȱbuildȱtrayȱlowersȱsoȱyouȱcanȱconnectȱtheȱUVȱsensor.
Figure 6-87: UV sensor connector