User's Manual

DOC08010 Rev. A (DRAFT 1) 6–63
Stratasys P750K User Guide
7. Pullȱtheȱlampȱreflectorȱoutȱofȱtheȱprintȱblock.
Figure 6-103: Removing the UV lamp reflector
8. Inspectȱtheȱnewȱlampȱreflector,ȱandȱmakeȱsureȱthatȱaȱblackȱstripȱisȱ
attachedȱtoȱtheȱinsideȱofȱit.ȱIfȱnot,ȱinstallȱone—onȱtheȱsideȱofȱtheȱ
reflectorȱoppositeȱ(notȱnextȱto)ȱtheȱprintȱblock.
Note: Extra black strips are included in the printer Start-up Kit. If
necessary, you can remove the black strip from the old reflector and install
it in the new reflector (as long as the black paint has not faded).
9. Discardȱtheȱoldȱreflectorȱandȱlamp.
Dispose of the used UV lamp in accordance with environmental and safety
requirements.
WARNING: Broken lamp hazard.
UV lamps contain mercury. Deal with broken lamps with caution.
¾ Ventilate the room thoroughly.
¾ Use protective gloves when collecting mercury and lamp components.
¾ Remove spilled mercury with a method that prevents the generation of
mercury vapor, such as a syringe, packing tape or paper.
¾ Place the broken lamp, mercury and contaminated materials in an air-
tight, non-metallic container.