Installation Guide

Figure 5.3

Wall Channel

Window

Figure 5.4

The window flashing must be fitted from the inside of the shed. Fit the

short face of the flashing between the window and the cut edge of the

Wall Sheet. Secure the flashing to the Wall Sheet with four evenly spaced

rivets. Ensure all rivets are crest-fixed through to the sheets (Figure 5.4).

Fit the window within the opening. Ensure the top lip of the window is

fitted between the Wall Channel and Wall Sheets. A minimum of four

evenly spaced rivets must be used along each side of the window frame. All

fasteners must be fixed through the crests of the Wall Sheets (Figure 5.3).

SHED MAINTENANCE

Your Stratco Handi-Mate

Shed will maintain its good looks for even

longer with a simple wash and wipe down. Cleaning should be performed

as often as is required to remove any dirt, salt and pollutants.

Stratco Handi-Mate

Sheds are produced from the highest quality

materials and will provide many years of service. Refer to the ‘Selection

Use and Maintenance’ brochure for more information on how to get the

best out of your product.

PROFILE DESCRIPTION PRODUCT CODE

Door Handle HMTH

Door Tongue HMDT

Door Latch HMDL

Handle Mount HMDM

Corner Bracket HMCB

Door Jamb HMDJ

Door Shroud HMDSHDRBO

Top Door Channel HMDCTO

Bottom Door Channel HMDCBO

Vertical Door Channel HMDCVE

Wall Channel HMWC

Bottom Channel HMBR

COMPONENT INDEX