Instructions / Assembly
STEP 5
Push slats down into side frame ensuring spacer
blocks are placed between each slat.
Install tip: Place spacer block on bottom plate
before pushing first slat down so that first slat sits
on a spacer block.
Spacer blocks supplied in kit allow slat spacing of
⁄ inch or ⁄ inch. If a dierent spacing is required,
source appropriate spacer blocks to achieve your
desired slat spacing.
Spacer blocks are NOT removed after inserting slats
and remain as part of the assembled screen
STEP 6
Once all slats are in place, carefully attach top caps
FINISHED!
STEP 4
For ⁄ inch spacing, lay the spacer block flat. For ⁄
inch spacing, stand the spacer block on its end.
1 WAY, 2 WAY & CORNER POST SYSTEM
ASSEMBLY GUIDE