Instructions / Assembly
STEP 1
Take measurement between wall or post at 3 points:
top, middle and bottom.
Take note of the smallest width measurement.
STEP 3
Ax outer frame to post or wall with screws (sold
separately)
STEP 2
Remove top cap and set aside for later use (Do not
remove cap from bottom end of side frame).
Slide out the inner gripping channel.
STEP 4
Slide inner gripping channel back into outer frame
TOOLS REQUIRED FOR INSTALLATION
METAL TAPE MEASURE
SPIRIT LEVEL
PHILLIPS HEAD SCREWDRIVER BIT FOR DRILL
CARPENTERS PENCIL
POWER AND/OR CORDLESS DRILL
TIMBER, MASONRY OR STEEL DRILL BITS AS NEEDED
DROP SAW WITH SUITABLE BLADE FOR CUTTING ALUMINIUM IF ADJUSTING HEIGHT OR WIDTH
NOTE
If installing screen in
area where gripping
channel cannot be
removed (e.g. close to
underside of roof line),
simply drill large pilot
hole through inner
gripping channel to
allow screws to pass
through and ax outer
frame directly to wall
or post.
SIDE FRAME
ASSEMBLY GUIDE