User's Manual Part 4

STRATEGIC Technologies Inc. System Definitions
System Definitions
Alarm............................ An event that needs immediate attention.
Battery (PID) ................ Proprietary 6V power pack that provides the PID one year of life.
Battery (PRU+)............. There are two batteries in the PRU+. The main battery (lead acid)
provides power to the PRU+ when it is disconnected from AC power (life -
24 hours). The memory back-up battery (Lithium) provides power to the
event memory and the clock when the PRU+ is switched off (life - one
month). Both batteries are re-chargeable.
Case Open (PID).......... Alarm that indicates the PID has been opened or severely damaged.
Case Open (PRU+)...... Alarm that indicates the PRU+ has been opened or severely damaged.
CC................................ Central Computer.
Clear ............................ An event that indicates an alarm has been resolved.
CMU............................. Cellular Module Unit. Uses the cellular telephone network to connect the
PRU+ to the CC.
Cursor .......................... A block that blinks indicating which number is being edited in Extended
Special Function Mode.
Date Format ................. The order in which the date appears (YMD, DMY, MDY) in run mode.
Dial Mode..................... The type of dialling the PRU+ will perform when calling the CC.
Downloading ................ The act of sending information from the PRU+ to the CC
Event............................ An occurrence that is generated by the PRU+ or CC.
Extended Special
Function Mode ............. Accessible by using the LOCK. Used to change internal settings and
parameters.
FVU..............................Field Verification Unit. Used to monitor the participant away from the area
of confinement.
ID ................................. The number on the CC that identifies each participant.
Info .............................. An event that is for your information or does not require immediate
attention.
Interference.................. Radio Frequency noise that affects the communication link between the
PRU+ and PID
Leave Time .................. The time between transmissions before the PRU+ will acknowledge the
PID is out of range.