User's Manual Part 4

STRATEGIC Technologies Inc. Quick Instal
l
Motion Sensor
The Platinum Plus Receiver (PRU+) contains a sensor which will report motion if the receiver is
moved by the participant once it has been installed. Normal household activities could cause
movement such as the receiver being bumped or being moved to clean.
When the PRU+ senses motion, it will immediately record a motion event. In order to move the
receiver any distance it would be necessary for the participant to disconnect both the AC power and
telephone. If the receiver records a Telephone Disconnect, Telephone Connect, AC Disconnect
and/or AC Connect event within two (2) minutes before or after an motion event, the motion event
will be recorded as an “Alarm Motion”. If there is no Telephone or AC message, the motion event
will be recorded as an “..info motion” message.
The following examples show various ways the motion is reported and when a motion alarm would
be reported:
A. An AC or telephone event occurs, then within two minutes a motion event occurs, the receiver
will report the following:
Event reported Explanation
Alarm No AC - AC was disconnected, no previous motion was recently evident
Alarm Motion - motion is sensed within 2 minutes of the AC disconnect.
B. A motion event occurs, there was no prior AC or Telephone related event, the receiver will
report the following:
Event reported Explanation
..Info Motion - motion was sensed, no previous recent AC or Telephone event.
C. Motion occurs, then within 2 minutes an AC or Telephone disconnect occurs, the receiver will
report the following:
Event reported Explanation
..Info Motion - motion was sensed, no previous recent AC or Telephone event.
Alarm Tel. Disc. - the telephone was disconnected from the receiver
Alarm Motion - the telephone disconnect occurred within 2 minutes of the first
motion event