User's Manual Part 4

STRATEGIC Technologies Inc. Individual Status Log Repor
t
..info pru batt ok Clear The PRU+ is indicating the low battery has been
corrected.
..info enter Info Non-Violation presence
..info leave Info Non-Violation absence
..info PRU Reset Info The PRU+ has been reset or turned on after total loss
of power
ALARM AWAY Alarm Unauthorized absence
.cont away Cont Indicates a continuing unauthorized absence
..info enter ok Clear The participant has entered after an unauthorized
absence
ALARM ENTER Alarm Unauthorized presence.
. cont here Cont Indicates a continuing unauthorized presence
..info leave ok Clear The participant has left after an authorized presence
ALARM PENDANT Alarm The Victims pendant has transmitted. (See Domestic
Violence Deterrent Program)
ALARM PANIC BUTTON Alarm The Panic Button attached to the PRU+ has been
pressed. (See Domestic Violence Deterrent Program)
ALARM MOTION Alarm The PRU+ has been moved while being unplugged
from AC Power
..info motion Info The PRU+ has been moved
..info motion ok Clear The PRU+ has stopped moving
ALARM PRU OVERDUE CC The PRU+ has not called in to the CC at the
scheduled check-in time
..info events cleared Info The events have been cleared on a PRU+
..info inFunctionMode Info The PRU+ has been put into Special Function Mode by
the KEY
..info pru power down Info The PRU+ has been turned off while in Special
Function Mode
..info mess. receiv. Info The Participant has seen the message sent to the
PRU. (ie Participant has pressed “A” to receive
message)
..info auto page CC A pager alarm notification was sent
..info pd changed CC The participant personal data was changed
..info sd/cd changed CC The participant sentence / curfew data was changed
..info cc changed CC The participant curfew comments were changed
..info log comment CC A comment manually entered into the log by an
operator
Event Type Definitions
The event type describes when each event calls the Central Computer and the priority assigned to
that event (see Events Generated for the Individual Status Log above).