Specification Sheet

GUNS
The recommendations listed apply to full-size weapons unless
otherwise noted.
The TLR-3 is available for a variety of compact weapons.
BERETTA:
Cx4 Storm (carbine/rifle) – TLR fits with 1913 key.
Px4 Storm (Pistol) - TLR fits with standard key. NOTE: M lights are VERY loose.
Vertec - New polymer key – 1913
Older aluminum key – GL (Standard).
CZ:
P-01 - Should work with GL (Standard) key. (Not tested; based on similar European
version)
FN:
5.7 (with Picatinny style rail) -1913 key.
GLOCK:
Any with rails – GL (Standard) key
Cannot fit
Glocks that ARE NOT equipped with factory rails.
After installing a contour remote on a TLR-2 equipped Glock it will likely be necessary to
rezero the laser.
HK:
USP (full size) uses our HK adapter 69085 with a GL (Standard) key.
(compact) uses our HK adapter 69091 with a GL (Standard) key.
HK P2000 is supposed to have Picatinny rail. (NOT CHECKED)
HK P30 -1913 key.
NOTE: The rail tilts down slightly from the bore. This may result in laser
zeroing difficulty closer than 50 feet (depending on the tolerances of the
pistol and laser).