Specification Sheet

KIMBER:
TLE RLII (1911 with rail) – Picatinny key.
RUGER:
KP345 – GL (Standard) key.
SR-9 – GL (Standard) key
SIG SAUER:
GSR or 1911 Style with flat bottom rail - Picatinny key.
ANY ALUMINUM FRAME SIG WITH A ROUND BOTTOM RAIL: Including the P220R,
P229R, etc. The Sig round bottom rail departs from the true shape of both the 1913
and Universal standards and may cause an improper fit. The TLR will work with the
1913 key but THERE WILL BE DAMAGE to the finish of both the gun and the light. The
retaining screw must be TIGHT.
Newer Sig P series guns are supposed to have a true Picatinny rail. This has not been
verified by Streamlight.
SP2022 - Polymer frame. Same comments as for aluminum frames, EXCEPT that the
polymer frame is a little thicker and does not show marks from a clamp because it is
molded from black material. PER SIG, the TLR with the 1913 key works.
SMITH & WESSON:
On the TSW and 99 models, the slot is too far back for the standard key and requires
the special S&W key. There are many different models of TSW, but as long as it's a
TSW WITH A RAIL, it uses the S&W key.
Smith & Wesson M&P autoloader takes the Picatinny key.
SIGMA – Cannot fit
.
SPRINGFIELD ARMORY:
Operator (1911 with rail) – Picatinny key.
XD (4 & 5 inch barrels) – GL (Standard) key. Cannot fit 3” barrel.