User Manual

2- Swing Door Open


3- Replace Batteries


5- Swing Door Closed

6- Lock

Rail Keys


Each rail key is stamped for easy identication and the keys
share a common key screw and hex nut. Each key has a hex
nut cavity in the base.
1. Select the appropriate key and insert a hex nut into the
cavity in the base of the key. Note: Adjust the hex nut so
no portion protrudes from the key.


3. Insert the key into the TLR key pocket and use a 7/64”
hex wrench to secure it with the key screw.
NOTE: A key MUST be used or the TLR will slide
off the front of the rail under recoil.
Hex Nut Cavity

997651 TLR1_TLR2 Op_Instructions Rev C.indd 5 2/1/13 11:01 AM