Specification Sheet

ManualsBrandsStreamlight ManualsGun Accessories, Maintenance & StorageStreamlight 69264 TLR-1 High Lumen Rail-Mounted Earless Tactical Light with Rail Locating Keys and Lithium Batteries, Black - 800 Lumens

TLR Compatibility List

KEYS

GL (Standard) keys fit Glock or “universal” rails. These have a cross slot about 5/32”

wide.

1913 (MIL-STD-1913 “Picatinny”) AND 1913 The 1913 key is wider than the standard

key because the slots are nominally .206” wide. (A little more than 3/16”) The standard

key will work with a Picatinny rail but the light will move back and forth with recoil unless

the clamp is very tight. Some guns with a Picatinny rail still need a standard key

depending on the construction of the actual rail. These will be identified for the

individual guns when we test them.

SMITH & WESSON AND TSW/99 keys have the bar extended farther back than the

other keys. They are for rails having a non-standard (too short) distance between the

slot and the trigger guard.

BERETTA 90two Looks like it has a Picatinny rail but dimensions are different.

Use the 90two key for the TLR.

Note: M-lights should not be used on the 90two and will fall off under recoil.

The GL (Standard) system

key appears somewhat

thinner than the Picatinny

The Picatinny key is

wider than the GL

(Standard) system key.

The S&W key is a different

shape than the other keys.

Summary of content (4 pages)

PAGE 1
TLR Compatibility List KEYS The GL (Standard) system key appears somewhat thinner than the Picatinny k GL (Standard) keys fit Glock or “universal” rails. These have a cross slot about 5/32” wide. The Picatinny key is wider than the GL (Standard) system key. 1913 (MIL-STD-1913 “Picatinny”) AND 1913 The 1913 key is wider than the standard key because the slots are nominally .206” wide.
PAGE 2
GUNS The recommendations listed apply to full-size weapons unless otherwise noted. The TLR-3 is available for a variety of compact weapons. BERETTA: Cx4 Storm (carbine/rifle) – TLR fits with 1913 key. Px4 Storm (Pistol) - TLR fits with standard key. NOTE: M lights are VERY loose. Vertec - New polymer key – 1913 Older aluminum key – GL (Standard). CZ: P-01 - Should work with GL (Standard) key. (Not tested; based on similar European version) FN: 5.7 (with Picatinny style rail) -1913 key.
PAGE 3
KIMBER: TLE RLII (1911 with rail) – Picatinny key. RUGER: KP345 – GL (Standard) key. SR-9 – GL (Standard) key SIG SAUER: GSR or 1911 Style with flat bottom rail - Picatinny key. ANY ALUMINUM FRAME SIG WITH A ROUND BOTTOM RAIL: Including the P220R, P229R, etc. The Sig round bottom rail departs from the true shape of both the 1913 and Universal standards and may cause an improper fit. The TLR will work with the 1913 key but THERE WILL BE DAMAGE to the finish of both the gun and the light.
PAGE 4
WALTHER: 99 - New (2004 models) FULL SIZE ones are nearly the same as the S&W 99 and use the S&W key. Older ones (no slot across the rail and the side grooves CLOSED in front) cannot be fitted with a TLR. 99 Compact – Cannot fit. Rail is too short. P22 – Cannot fit. Non-standard rail. Rev.