Instructions / Assembly

INSTALLATION INSTRUCTIONS
SILICONE SEALANT LEVEL TAPE MEASURE SAFETY GLASSES
VANITY TOP
SUGGESTED TOOLS
WARNING!
PRODUCT CARE AND MAINTENANCE
Even though our solid surface resin material is durable, when handled incorrectly, it can
become fragile. In order to ensure proper handling and usage, below are some tips!
Remove the vanity from
the box vertically.
Carry the vanity top in an upright position. NEVER carry it
at. Ensure that there are two people carrying the top.
In order to clean the vanity top, please only use soft cotton cloth or soft sponge.
Never use acidic, alkali, or any products that state on their label that theyre not
suitable for using on poly-marble or natural stone, to clean the vanity top.
To clean the vanity top, wet the surface of the top, apply cleaning product with
cloth or sponge and then use water to clean and rinse. Ensure that no cleaning
products are left over on the top as it may leave residue.
Carefully remove the vanity top from the box, making
sure to gently place it on an even surface. At this point,
it would be best to install the faucet and drain as per
the manufacturers instructions.
Apply silicone to the top of the cabinet. Make sure to
use enough so as to ensure that the vanity will rmly
stay in position.
If there is any excess silicone, clean it off gently with
a soft cotton cloth or sponge.
Gently pick up the vanity top and place on the top of
the cabinet, as shown in the diagram.
Enjoy you new bathroom vanity with your
Streamline® vanity top!
NOTE: Top style, shape cutout on the top vanity may vary from the
picture above. Instructional purposes only.
1
2
3
4
5

Summary of content (2 pages)