Installation Instructions

MAINTENANCE
A. If there is splash or low flow rate,please remove the aerator with the wrench and clean the debris.
B. If faucet leaks from the handle or drips from spout, please replace cartridge following the following
steps:
1. Disassemble the screw② with allenkey①, take out the handle③, then remove the trim cap④.
2. Unscrew the cartridge nut① with adjustable wrench, then take out the old cartridge②.
3. Place a new cartridge in the cartridge seat, then screw the cartridge lock nut and assemble the handle
by securing the screws. Repeat the above steps for the other cartridge if necessary.
1
2
3
4
1
2