Installation Guide

21
(310) [e-mail]
Two holes need to be cut in the cabinet: one for the duct and another
for the power cord.
Use a saw or drill to create a circular hole in the bottom of the cabinet
with a diameter of 5.25 inches.
Drill a 1-1/2 inch hole into the bottom of the cabinet next to the vent hole
to create an access hole for the power cord.
Remove any tape that may be on the duct.
16.
Take the provided damper and insert it into the top of the range hood
duct. Rotate clockwise to tighten in place.
17.
If installing using the ducted installation method, please follow the
below steps. If using the ductless installation method, PLEASE SKIP
and move to step #23.
Damper
Electric
Jigsaw