Installation Guide

23
(310) [e-mail]
Attach the square to round outlet damper (NOT INCLUDED IN
PURCHASE) or rectangular damper (NOT INCLUDED IN PURCHASE).
21.
If choosing to vent from the side, remove the backplate from the range
hood. Using pliers, disassemble the metal panel by pulling it from left to
right. Then, use the pliers to tear away the seal by pulling it outward.
20.
Pliers
Take the provided vent cover and place it on top of the venting cutout.
Rotate clockwise to tighten in place.
22.
Vent Cover
Side Vent Installation
Square
To Round
Outlet
Adaptor
Rectangular
Duct