Installation Guide

27
(310) [e-mail]
If you plan to use the provided template, affix the template with tape to
the wall, making sure that it aligns with the two previously drawn lines.
Alternatively, you may also position the range hood along the vertical
and horizontal lines and mark the location of the mounting holes on the
wall.
2.
Use a 5/16’’ [8mm] drill bit to make (2) pilot holes in the wall at the
marked locations. For wood, use a 5/32'' drill bit.
3.
4.
Insert the plastic wall anchors firmly into the drilled holes.
Plastic
Anchors