Use Instruction

ST1955 FCC IC Instruction For Use_V21_III
02 Aug. 21
Page 7 of 13 StreamUnlimited Engineering GmbH
Gutheil-Schoder-G. 10, 1100 Vienna, Austria
T [phone], F [phone]
3.2 Instruction for use requirements
To comply with the FCC and ISED rules the OEM/host integrator shall include the following
statements on the device, packaging and in the user manual, as applicable.
3.2.1 USA :
The device shall bear the following statement in a conspicuous location on the device.
When the device is so small or for such use that it is impracticable to label it with the statement
in a font that is four-point or larger, and the device does not have a display that can show
electronic labeling, then the information required by this paragraph shall be placed in the user
manual and must also either be placed on the device packaging or on a removable label
attached to the device.
Where a device is constructed in two or more sections connected by wires and marketed
together, the statement is required to be affixed only to the main control unit.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This product does not contain any user serviceable components. Any unauthorized product
changes or modifications will invalidate warranty and all applicable regulatory certifications and
approvals, including authority to operate this device.
The user manual shall contain the following statements.
Warning
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.