Table Of Contents MA400 Congratulations on the purchase of your new motorized treadmill. To help ensure the enjoyable and trouble-free operation of your new treadmill, we strongly suggest you read this manual carefully and follow its recommendations. Important Safety Instruction.........1 Assembly Instruction MA400/600 ..............................2 ELECTRONICS OVERVIEW MA400/600 ..............................4 Preset Program MA600....................................5 MA400.............................
, Never use extension cords between the treadmill and wall outlet.
MA600/MA400 S ince your treadmill is a heavy piece of equipment, we recommend that after taking off the top portion of the box, you slit the corners of the lower carton and fold down the sides. This will eliminate the need for you to pick up the treadmill over the sides of the box. Prior to starting the assembly process take all of the parts out of the box, remove all plastic bags, and lay them out on the floor to become familiar with the compoents.
MA600/MA400 HANDLEBAR SUPPORT POST ASSEMBLY L N 1.Remove screw , and nut from both right/left sides of base frame. 2.Stand up the support post and handle bar. (FIG-1) with on CONSOLE ASSEMBLY shown in Figure 5. 1.Adjust the handlebars so they are positioned on the handlebar posts. Secure the right/left handle bar on the support post by tightening the screws .(FIG-4) 2.Rotate the console tube so the console bracket is positioned as shown in Figure 4.
MA600/MA400 ELECTRONICS OVERVIEW Display Functions MA600 Time Dis Cal Pulse Lap Scan Body Fat Age Sex Weight Height IONIZEF ON/OFF Incline Speed MA400 P3 P5 P8 INCLINE INCLINE 10 MANUAL P6 P9 INCLINE 8 INCLINE P4 5km P7 6 INCLINE P2 4 BODY MASS Incline Speed FETY KEY SA HOLD TO RESET & 4
MA600\MA400 EXERCISE PROGRAMS MA600 Speed Programs- programs P1-P6 automatically change the speed of the treadmill throughout the workout. Each program starts at a minimum speed of 2 km/h and depending upon the program, can go up to a maximum speed to 10 km/h. The incline can be manually set by the user in any of the speed programs and this incline will remain throughout the workout unless modified by the user.
MA600\MA400 EXERCISE PROGRAMS User Setup Programs- (MA600:2users, MA400:1user): provide the ability to establish customized workout programs specific to a users workout requirements. For each user set up program, the workout time is set and then 10 unique workout segments are set up by the user. For each segment the user can preset the speed and incline of the segment by using the up and down arrow buttons and then pushing the mode button to set each program.
MA600 EXERCISE PROGRAMS BMP: (Only for MA600) Female Range Age Male Range Excellent Good Poor Excellent Good Poor 19-24 18.9%~25.0% 25.0%~29.6% 29.6%UP 10.8%~19.0% 19.0%~23.3% 23.3%UP 25-29 18.9%~25.4% 25.4%~29.8% 29.8%UP 12.8%~20.3% 20.3%~24.4% 24.4%UP 30-34 19.7%~26.4% 26.4%~30.5% 30.5%UP 14.5%~21.5% 21.5%~25.2% 25.2%UP 35-39 21.0%~27.7% 27.7%~31.5% 31.5%UP 16.1%~22.6% 22.6%~26.1% 26.1%UP 40-44 22.6%~29.3% 29.3%~32.8% 32.8%UP 17.5%~23.6% 23.6%~26.9% 26.
MA600/MA400 1km 1 km right speed right 0.1 km speed by 0.1 km. speed km/h scroll through the speeds. level. level level.
MA600/MA400 TREADMILL OPERATIONS Programs Setup and Selection - (MA600 P1 - P12 , MA400 P1 - P9) 1.Select Program: To Start a program simply select the desired program by pressing on either the "UP" and "DOWN" or "FAST" and "SLOW" buttons and then pressing the "MODE" button. 2.Select Level:Select the desired level (L1~L3) by pressing on either the "UP" and "DOWN" or "FAST" and "SLOW" buttons and then pressing the "MODE" button. 3.
MA600/MA400 TREADMILL OPERATIONS Body Composition Analysis 1.Select Program: Use either set of "up" and "down" arrows to scroll through the programs until you reach the "Body mass" composition program and press the "Mode" button. 2.Enter Height: Use either set of "up" and "down" arrows to select your height and press the "Mode" button (The range from 110cm~220cm). 3.Enter Weight: Use either set of "up" and "down" arrows to select your weight and press the "Mode" button (10~200kg). 4.
MA400 P6 P7 P8 P9(5km) 2 3 4 2 3 4 1 2 3 1 2 3 2 3 4 2 3 4 1 2 3 1 2 3 2 3 4 3 4 5 3 4 5 3 4 5 7 8 9 3 4 5 3 4 5 3 4 5 7 8 9 4 5 6 4 5 6 4 5 6 6 7 8 2 2 2 4 5 6 4 5 6 6 7 8 2 2 2 6 7 8 3 4 5 5 6 7 7 8 9 9 10 11 3 4 5 5 6 7 7 8 9 9 10 11 8 9 10 2 3 4 6 7 8 8 9 10 2 3 4 2 3 4 6 7 8 8 9 10 2 3 4 7 8 9 3 4 5 7 8 9 8 9 10 2 3 4 3 4 5 7 8 9 8 9 10 2 3 4 6 7 8 4 5 6 8 9 10 7 8 9 9 10 11 4 5 6 8 9 10 7 8 9 9 10 11 5 6 7 3 4 5 6 7 8 6 7
situation.
on When you feel the noise of running belt is louder, please use silicone fluid spray on running belt. It is easy and quick. Before proceeding, ensure the treadmill power is off and unplugged. Fold up the treadmill to upright position. Loosen the running belt and then spray silicone on the inner side of running belt from both sides. Ensure spray entire running belt. Please see illustration. After spraying, please align the running belt and adjust the running belt tension. . wrench # 6 with right .
Push up 1.Lift up the treadmill and the pop-pin will lock automatically on fold up position. 2.Then turn the knob to secure lock. Please follow the steps: 1.Turn to loose the knob. 2.Push up the treadmill a little bit by right hand. 3.Pull up the knob to unlock the locking tube. 4.Lower down the treadmill. 3 MA400 B Mass mass MA400 6\E7 1.Reset incline value. E6\E7: MA400 or call for service 6\E7 1 .Press "Mode"+"Slow" buttons together. 2 .Press "Mode"+"Up" buttons together. 3 .