Operation Manual

TREADMILL OPERATIONS
TREADMILL OPERATIONS
Body Composition Analysis
1.Select Program: Use either set of "up" and "down" arrows to scroll through the programs until you
reach the "Body mass" composition program and press the "Mode" button.
2.Enter Height: Use either set of "up" and "down" arrows to select your height and press the "Mode"
button (The range from 110cm~220cm).
3.Enter Weight: Use either set of "up" and "down" arrows to select your weight and press the "Mode"
button (10~200kg).
4.Select Sex: Press the mode button for a "Girl" selection or press either set of "up" or "down"
buttons to scroll to the "Boy" selection and then press the "Mode" button. Because of the limitations
of the LED display these selections are shwon as "girl" and "boy" on the display console.
5.Enter Age:10~70 years old.
6.Press Start: After all selections are made, press the start button and place both hands over the heart
rate sensors on the handlebars. It will take several seconds for the system to calculate each readout.
If after waiting for 10 seconds the system doesn't show your readouts, it is not getting a good reading
from the heart rate sensors. This can generally be solved by walking on the treadmill at an average
speed for 3-4 minutes to increase your heart rate and iimprove the signal pickup from the heart rate
sensors.
Pause Function
Pause the treadmill at any time during the operation by pressing the "Stop" button once. To resume
operations, press the "Start" button.
Reset Button
Pressing the "Reset" button will reset the console to the beginning of the program setup process.
10
MA600/MA400