Operation Manual

Wrench-6mm

Wrench-5mm

Wrench

G1 G2

F1 F2

M1 M2

P1 P2

screw L

nylon nut N

screws O

screws Q

screws R

screws S

MA600/MA400

Parts

Hardware、tool

Frame

Support Handle

Handlebar

Console

Ground Wire (Only for MA600)

Wire Harness

Hand Pulse Cable

Left Rack

Right Rack

Left Cover

Right Cover

Speed Control Harness

Incline Control Harness

Screws Already in Place the Treadmill

Screws in the Plastic Bag

M10 X 60L (2PCS)

M8 X 15L ( 4PCS )

screws T

Ø4.1 X 5/8L ( 4PCS )

M8 X 65L( 2PCS )

M4 X 20L( 6PCS )

Ø4.1 X 10L( 4PCS )

TOOL

M10 X 10t (2PCS)

Since your treadmill is a heavy piece of equipment, we recommend that after taking off the top portion of the box,

you slit the corners of the lower carton and fold down the sides. This will eliminate the need for you to pick up the

treadmill over the sides of the box.

Prior to starting the assembly process take all of the parts out of the box, remove all plastic bags, and lay them out

on the floor to become familiar with the compoents. Make sure that you remove all parts packaged underneath the

readmill. You may need to slightly pick up the back of the treadmill to get better access to the parts on the bottom.

You will notice that the treadmill is completely assembled except for the handlebars and the display window.