Manualshelf

User Manual

ManualsBrandsStrex ManualsAudio & Hi-FiCar radio with Bluetooth for all cars - USB, AUX and Handsfree - Remote control - Single DIN Car Radio with Built-in Microphone
31323334353637383940
● The red wire is for the ACC ignition switch (positive electrode). It controls turning on/o when
you power on/o your car (when you insert/remove your car key). The yellow wire is for a
constant power supply (positive electrode) and is responsible for the memory function. Although
these two wires are positive electrodes, their functions are dierent. If these two wires are
connected wrong, there is no memory function.
● The red, yellow, and black wire (all three) has to be powered on simultaneously. Only then the
Car radio can work well.
● The blue wire for the auto antenna control doesn’t need to be connected. Just wrap it up with
insulated tape.
● There are 4 pairs of speaker wires. 1 pair must connect to 1 speaker. Wrap up other wires one by
one with insulated tape if your car does not have 4 speakers. Do not wrap them all together!
1. (POWER ON/OFF)
Short press the button, to turn the Car Radio on.
Long press three seconds to turn the Car Radio o.
2. MODE-FUNCTION SELECTOR
Push this button repeatedly and the LCD will display the following sequence: RADIO →USB
→ SD → AUX-IN → BT. BT. In the Bluetooth mode, short press to end a call.
3. AUTO SEEK SEARCH TUNING (AMS)
In the RADIO Mode, short press for browsing, and long press to automatically save the station.
In playback, the function is to choose the song.
4. BAND BUTTON
In the RADIO mode, each band is toggled cyclically by pressing the key FM1 - FM2 - FM3.
5. I◀◀ (the previous song)
In MP3 player mode (USB/SD/MMC): previous song.
In RADIO mode: search the previous radio station.
6. ▶▶I (the next song)
In MP3 player mode (USB/SD/MMC): next song
In RADIO mode: search for the next radio station.
7. 1 ▶I BUTTON
Memory stations 1-6 for radio control the playback of your music coming through the USB or
SD/MMC external device. Press once to start playback.
During “play” repress the button to pause playback. Press the button once more to resume play.
8. 2/INT BUTTON
When this button is pressed, the ‘INT’ indication is displayed and the rst several seconds of
each
track are played. Press again to stop the intro and listen to the track.
OPERATING INSTRUCTIONS
32