Technical Data Bulletin

ADVANCED BUILDING PRODUCTS SPECIFICATIONS APRIL 2002
Advanced Building Products, Inc., P.O. Box 98, Springvale, Maine 04083
TEL: [phone]; FAX: [phone]; WEBSITE: www.advancedbuildingproducts.com
______________________________________________________________________________
SELF-ADHERING CAVITY WALL MEMBRANE 04090.4 - 1
SECTION 04090.4
SELF-ADHERING CAVITY WALL MEMBRANE
This product guide specification can be used to specify Strip-N-Flash®, a self-adhering,
waterproofing membrane designed to provide moisture protection within a masonry wall
cavity. This product specification can be inserted into SECTION 04800 - MASONRY
ASSEMBLIES or other similar masonry specification section. The various paragraphs of
this guide section will need to be inserted in the appropriate locations in either Part 1, 2,
or 3. This guide might also be used as a separate section or combined with other guides to
develop SECTION 04090 - MASONRY ACCESSORIES. *****
PART 1 - GENERAL
1.1 SUMMARY
A. Section includes: Self-adhering waterproofing membrane and primer to provide
moisture protection within masonry wall cavities.
1.2 REFERENCES
A. ASTM D146 - Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics
for Roofing and Waterproofing.
B. ASTM D412 - Test Methods for Vulcanized Rubber and Thermoplastic Rubbers
and Thermoplastic Elastomers - Tension.
C. ASTM D903 - Peel or Stripping Strength of Adhesive Bonds.
D. ASTM D2822 - Asphalt Roof Cement.
E. ASTM E154 - Water Vapor Retarders Used in Contact with Earth Under Concrete
Slabs, or Walls, or as Ground Cover.
1.3 SUBMITTALS
A. Provide in accordance with Section 01330 - Submittal Procedures:
1. Product data and installation instructions.
2. Material safety data sheets (MSDS).
3. [2 by 2] [51 by 51 mm] minimum sample of membrane.
1.4 PRODUCT HANDLING
A. Protect products from excessive heat, freezing temperatures, and direct sunlight