User's Manual Part 4

Access / One
®
Network
Managing Modules 137
7
User Login
This command allows you to establish the identity of this module, define its physical
location within the environment based on latitude, longitude and elevation, and set
up the module’s login parameters (username and password).
Figure 106. Module Identity and User Management (Login) Parameters
The following options are available with this command:
◗ Module Name
Edit the existing name or enter a new name for this module. If no name is
defined for the module, the system automatically sets the module’s factory
default serial number as the name.
◗ Network Name
This field (not editable) shows the name of the network that this module is
associated with. If you need to change the network association for this
module, go to “Update Network Membership” on page 129.
◗ Latitude
This field allows you to define the specific latitude for where this module is
located (more relevant to OWS modules where physical location and
environment can be extreme). This setting must be within the range of -90
degrees/minutes to +90 degrees/minutes. The default is +0.000000.