User's Manual Part 4

Access / One

Network

146 Managing Modules

The following options are available with this command:

◗ Active Country Code

This field (not editable) shows the currently active country code.

◗ Config Country Code

This field is not editable because this model of your Access/One Network

applies only to the United States (which is the only country code available).

◗ Operating Mode

This option allows you to select the operating mode (either Client Connect or

Network Connect) manually, or choose Automatic Selection if you want the

module to select its operating mode automatically.

◗ Wireless Mode

This option allows you to select the wireless mode for this module. The

following modes are available:

• 802.11a

– 802.11a: This is the default standard 802.11a wireless mode.

– 802.11a Turbo: This configures the module to operate in Turbo

mode, allowing it to operate with data rates at speeds up to 108

Mbps. This translates to nearly double the throughput, but all user

devices must be capable of running the 802.11a Turbo mode and be

configured for it. Turbo mode is not an industry standard and so not

all 802.11a user devices support this feature.

• 802.11g

– 802.11g: This is the default standard 802.11g wireless mode.

– 802.11g Only: This mode restricts the module to the 802.11g

wireless mode only and does not allow 802.11b compatibility.