Manualshelf

User's Manual Part 4

ManualsBrandsStrix Systems ManualsElectronics802.11 a/g Wireless, Mesh Type Networking Device
31323334353637383940
Access / One
®
Network
152 Managing Modules
7
Client Connect
This command is similar to its corresponding command at the network level. The
only difference between the configuration windows is that the Client Connect
Privacy Tags option is not displayed at the module level. To configure your Client
Connect options for a wireless module, go to “Client Connect” on page 98.
Figure 113. Client Connect Configuration Window
When finished, click on the Update button to update this page and apply your
changes, then click on the Reboot button to reboot the module. If necessary, you
can click on the Refresh button in the toolbar to reset all parameters on this page to
their original values.