User's Manual Part 4

Access / One
®
Network
Managing Modules 153
7
Network Connect
This command is similar to its corresponding command at the network level, with
the addition of the Target MAC Address and Ignore RTD options. For all other
configuration options, go to “Network Connect” on page 106.
Figure 114. Network Connect Configuration Window
◗ Target MAC Address
Enter the MAC address for the wireless module to enable peer-to-peer
connectivity based on the module’s MAC address. You only need to complete
the MAC address (the first three fields are inputted automatically).
◗ Ignore RTD
Check this box to instruct the system to ignore the RTD (Round Trip Delay),
which ensures that the backhaul will stay connected to an AP even if the RTD
is zero. When RTD from a Client Connect is set to 0 (zero) a Network
Connect will drop its wireless connection to that Client Connect and scan for
a peer with a non zero RTD (that can ping the gateway). Ignoring the RTD
will keep the link up to that peer regardless, and eliminate self-healing. The
default is to ignore the RTD (enabled).