User's Guide Part 3

Access / One
®
Network
Managing the Network 81
5
After inputting data (or making selections), click on the Update button to update this
page, then click on the Apply Configuration tab to propagate your changes across
the network. If necessary, you can click on the factory default (FD) button in the
toolbar to reset all data on this page to its factory default state.
Priority/One - Class of Service
This command allows you enable and define Class of Service (CoS) filters to
prioritize traffic throughout your Access/One Network. Supported filters include:
◗ VLAN
◗ IP TOS (Type of Service)
◗ IP Protocol
CoS filters establish separate queues for different priority streams based on the filters
you define here. Data streams are then serviced according to their priority. In
addition, this command allows you to enable or disable the SpectraLink® Voice
Support feature.
Figure 62. Priority/One
The following options are available with this command:
◗ COS Global
Check the COS Prioritization box to enable COS filtering across the network,
or uncheck the box to disable the COS filtering functionality.