User's Guide Part 3

Access / One
®
Network
Managing the Network 85
5
◗ Secret
Enter a secret key in this field for the primary RADIUS server. During the
authentication process, the server and client exchange secret keys. The secret
keys must match for communication between the server and the client to
continue. The secret key is a valuable and necessary security measure.
◗ Secret Confirm
Confirm your secret key in this field.
◗ Checkpoint Interval
Check this box to enable a checkpoint interval, or uncheck this box to disable
this feature.
◗ Send Every
Once an interval time (in minutes) is established in this field, the reporting
module will send interim reports for each wireless device associated to it at
this interval period.
After inputting data (or making selections), click on the Update button to update this
page, then click on the Apply Configuration tab to propagate your changes across
the network. If necessary, you can click on the factory default (FD) button in the
toolbar to reset all data on this page to its factory default state.
Syslog
Access/One Network offers comprehensive Syslog (system logging) functionality,
including the ability to monitor Syslog events. Logged events can be sent to multiple
Syslog servers, though using more than one server can impact the system’s
performance. This command allows you to:
◗ Define your Syslog configuration parameters.
◗ Assign the Syslog (system logging) server IP address.
◗ Define the event logging destination (Command Line Interface, SNMP Syslog
MIB, or a defined Syslog server IP address).
◗ Establish the reporting level for each Access/One Network function (security,
wireless, management, and other).