User's Guide Part 3

Access / One
®
Network
92 Managing the Network
5
Wi-Fi
This area of Manager/One contains the primary configuration commands for your
Access/One Network in the Wi-Fi environment. Any commands executed here are
applied to all wireless modules, so make sure the changes you initiate are changes
that you want to apply to the entire network, otherwise go to “Managing Subnets
and Nodes” on page 125 or “Managing Modules” on page 131.
Radio Parameters
This command allows you to define your Access/One Network’s general radio
parameters. The following graphic shows an example of the factory defaulted
version of this page.
Figure 72. Setting Up Radio Parameters