User's Guide Part 3

Access / One
®
Network
102 Managing the Network
5
Select the desired Authentication and Encryption modes from the available
options. If you choose Dynamic (802.1x) or WPA authentication, you must
configure the RADIUS server(s) on this page (these fields only appear when
Dynamic or WPA is selected as the authentication type). See also, “Radius
Accounting” on page 84.
Figure 76. Configuring RADIUS Servers
If you choose WPA-PSK authentication, you must provide a WPA Pass Phrase
and confirm the pass phrase (these fields only appear when WPA-PSK is
selected as the authentication type.
Figure 77. WPA Pass Phrase
◗ Client Connect Security Keys
This option allows you to define up to 4 security encryption keys for your
Client Connects. To define a security key, click on the Enter Key 1 (through 4)
button to reveal the security key window, then select either hexadecimal or
ASCII format. Once you have selected the preferred format, choose 64 bit,
128 bit, or 152 bit encryption from the pull-down list and enter your security
key. After entering the key, click on the Update button to add the new key to
the list, or click on the Cancel button to abort the process.
Figure 78. Assigning Client Connect Security Keys