User's Manual

USER GUIDE
UPDATE MEMBERSHIP
The cloud display indicates all of the Network Nodes in the network (including rogue Strix
Nodes). Nodes which belong to the Network Server cloud name are dark grey in color and have
a checkbox that is checked. Nodes which are sky blue in color and have an unchecked checkbox
are not part of the cloud but may be admitted. Nodes which have no checkbox or are red with a
lock symbol may not be admitted to the cloud. Adding or removing Nodes from the cloud is
accomplished by checking or unchecking the checkbox and selecting the ‘Update Membership’
command. This will result in a reboot of Nodes which have changed status. Access/One
Network Nodes not admitted to a cloud name other than default will not bridge user traffic.
RENAME NETWORK
The administrator can use this command to rename the Access/One Network. Any device that
belongs to this network will then be admitted to the new network name without requiring a
network reboot.
VIEW ACTION STATUS
This command launches a separate window displaying a list of all the modules within the
wireless network. This list consists of a Network Node name, the device stack order (Row ID),
the IP address of the module and its current status. This window gives the most current status
because the information is refreshed every 5 seconds. The list below provides details on what
type of information the action status window provides. Note that some status values can occur
too quickly for observation. The display shows the last command sent to the module and the
pending status of that command.
Commands issued to an Access/One Network module:
Page: Toggle paging on or off
Apply Configuration: apply the configuration in the Network Server to the entire network
Image Load: download the software image as specified in the Firmware FTP settings
Prepare to Reboot: The module has received a command to anticipate a reboot
Stop Reboot: Halt the current reboot process, may be issued following the Prepare to
reboot command
Reboot: Execute the reboot
Include: Add this Node to the cloud
Exclude: Remove this Node from the cloud
Change Stack Name: change the Node name
18