User's Manual

USER GUIDE
• Enabling 802.11g Only Mode: Clicking on the ‘enable 802.11g Only mode’ checkbox
will configure all 802.11g Wireless Modules in the Access/One Network to support
802.11g only. In this mode each 802.11g Wireless Module will only support 802.11g
user devices, which will improve the performance of the 802.11g network. If this mode
is not enabled (default configuration) the 802.11g Wireless Modules will support both
802.11b and 802.11g user devices simultaneously. Note: When this mode is enabled, all
802.11b user devices will loose connectivity to the 802.11g Wireless Module.
Click the ‘Update’ button at the bottom of the page to save any changes made to the settings in
this page. Click the ‘Apply Configuration’ tab to make the configuration information active in
the Access/One Network cloud.
25