User's Manual

USER GUIDE
The Network Connect solution for Access/One Network prevents unauthorized wireless
connections from being established to the network by blocking user traffic in two scenarios:
1. If the Network Connect is configured for the default cloud name (AccessOne),
Manager/One forces the Administrator to approve/admit the Network Node to
the cloud before user traffic is bridged to the network.
2. If the two Network Nodes that are wirelessly connected (via the uplink) have
different Network Connect Security Keys configured.
In either instance, the Network Connect is remotely manageable within Manager/One to allow
configuration changes necessary to update the Network Connect parameters. However, if
Network Connect is configured for a new security key, but the receiving Network Node still has
the default security key, remote management will not be possible.
WIFI ACL
This window configures an Access Control List (ACL) determining which user devices (stations)
are allowed to connect to Access/One Network.
• Access Control List: Enables you to enable or deny network access based on the
MAC address of a user device (station).
o Disable: All stations can request association with a Network Node in the
Access/One Network. This means that the ACL will not be checked when a
station attempts to authenticate.
o Enable: Stations are assigned a DENY or ALLOW permission status. If the
MAC address of station trying to gain access is set to DENY, it will not be
allowed to associate with the network. If the MAC address is set to ALLOW, or
not configured in the ACL, the station will be allowed network access.
33