User Manual

OWS Field Installation 13
OWS Hardware Installation
2. Assemble the RJ45 plug/cable.
◗ Item 1 – Shielded RJ45 plug
◗ Item 2 – Gasket seal
◗ Item 3 – Plug holder
◗ Item 4 – Coupling ring
◗ Item 5 – Seal assembly
When assembling the plug, take
care not to lose the gasket seal
(item 2)—it must be in place
when the assembly is complete.
3. Install an RJ45 plug at the other
end of the cable.
4. Perform a continuity check on
each pin to verify that the cable
has been assembled correctly.
5. Unscrew the protective cap, then
connect the Ethernet cable to the
OWS enclosure.
Turn the coupling ring clockwise
(1/4 turn) to make the
connection.
The connection is locked when
you feel and hear a click.
1
2
3
4
5
Cap