User Manual

10 OWS Field Installation
OWS Hardware Installation
Connecting the Power Cord
This section provides instructions for configuring the power cord for either AC or DC operation, and
connecting the power cord to the OWS enclosure.
Parts Required
◗ AC or DC power cord, cut to the desired length (not supplied)
◗ AC/DC plug assembly
Tools Required
◗ Wire stripper
1. Review the pin connections.
◗ Pin 1 – AC Line
◗ Pin 2 – AC Neutral
◗ Pin 3 – Ground
◗ Pin 4 – DC Negative (–)
◗ Pin 5 – DC Positive (+)
2. Assemble the plug and connect
the plug to the power cord for the
electrical configuration you
need, either AC or DC.
Pin 1Pin 2
Pin 4Pin 5
Pin 3
Plug
Shield
Locking Tab
AC example shown
Power Cord