User Manual

OWS Field Installation 3
OWS Hardware Installation
OWS Enclosure Installation
This section provides instructions for mounting the OWS enclosure.
Mounting the OWS on a Vertical Pole
Parts Required
◗ OWS enclosure
◗ Pole
◗ 2 vertical mounting brackets
◗ 4 screws, for attaching the mounting brackets to the OWS enclosure
◗ 2 U-bolt assemblies, for mounting the OWS enclosure to a standard 1 7/8 inch diameter steel pole
◗ 2 straps, for mounting the OWS enclosure to a pole with a diameter greater than 1 7/8 inches
Tools Required
◗ Flat blade screwdriver ◗ 7/16 inch nut wrench
1. Attach the vertical mounting
brackets (2) to the OWS
enclosure.
2. Secure the vertical mounting
brackets to the OWS enclosure
with the four screws (2 for each
bracket).
Tighten all four screws to 10–12
lbf.ft (1.38–1.66 kgf.m).
Screws (x4)
Mounting Brackets (x2)